Description
A&D Weighing AD-4410 Weighing Indicator
A&D Weighing AD-4410 Weighing Indicator
AD-4410 features powerful vibration-cancelling and high speed sampling, ideal for rugged environments. High-Performance Digital Filter only requires one setting. For this reason, optimal settings for vibration cancelling can be found after just a few tries. Can be calibrated in an environment with vibrations.
Features:
- Circuits equipped with powerful noise reduction
- Accurate linear correction function using high-order equations
- Average holding function – allows averaging a specified interval of data and holding it.
- Comes equipped with Modbus-RTU
- The High-Performance Digital Filter provides high accuracy/high speed weighing in environments with vibration problems.
Specifications:
| Input Sensitivity | Over 0.15µV/d (d=minimum division) |
| Input Signal Range | —35mV to +35mV (–7mV/V to +7mV/V) |
| Load Cell Excitation | DC5V±5%, 120mA Remote sensing function included Up to 8 load cells (350Ω) can be connected |
| Zero Temperature Coefficient | ±0.02µV/˚C (Typ.) ±0.1µV/˚C (Max.) |
| Span Temperature Coefficient | ±3ppm/˚C (Typ.) ±15ppm/˚C (Max.) |
| Non-Linearity | 0.005% of full scale |
| Input Noise | Less than 0.3µVp-p |
| Maximum measurement voltage | –35mV to +35mV (–7mV/V to +7mV/V) |
| Input Impedance | 10MΩ or more |
| A/D Conversion Method | Delta Sigma |
| Internal Resolution | Approx. 16,000,000 counts |
| Display Resolution | 999,999d (less than 20,000d recommended) |
| Sampling Rate | 100 times/sec. |
| Main Display | 7-segment 6-digit green LED Character height of 14.6mm |
| Power | AC100V to 240V 50/60Hz |
| Consumption | Approx. 10VA |
| Operating Temperature | —10 to +40ºC (14ºF to 104ºF) |
| Operating Humidity | Less than 85% RH (non-condensing) |
| Physical Dimensions | 144(W) x 72(H) x 125(D) mm (Protrusions included, cable excluded) |
| Dust / Water Protection | IP65 |
| Net Weight | Approximately 800g |
| Warranty | 2 Year Warranty |
Additional Literature:
AD-4410 Datasheet
AD-4410 Manual
Accessories:
| Product # | Description |
| OP-03 | RS-485 DIN conncector |
| OP-04 | RS-232 DIN conncector |
| OP-07 | Analog output (4 – 20 mA) |
| OP-11 | Stand |
